JYD-JBAT06 automatic paper tube curling machine belongs to the paper tube production machinery in the textile industry. Now the new curling machine works by manual extrusion, using the principle of mechanical transmission, using mechanical and pneumatic transmission, and then makes the curling work naturalize.

The main shaft of JYD-JBAT06 automatic paper tube curling machine is divided into five sections, three straight sections and two threaded sections. There are three rotating rods distributed at 120 degrees. One end of the rotating rod has a roller and the other end has a roller. The motor is driven by a worm gear and a worm. The main shaft drives the automatic lifting mechanism and the automatic crimping mechanism to work, and the whole crimping process is automatically completed. The utility model has the advantages of simple operation, flexible use, low cost and high efficiency.

JYD-JBAT06 automatic paper tube curling machine adopts mechanical transmission. At a certain rotation speed, the curling abrasive tool uses the uniform operation command of the pressure head cam 404 to rotate the relatively fixed paper tube at high speed, and then the friction generates heat, so that the paper The pipe is easy to curl evenly, and the feed cylinder is used to control the cam 406 and the travel switch 408 to control the cylinder, thus realizing uniform automatic feeding and discharging, and the rear cylinder is used to control the travel switch 408 and the cam 405 to work.

JYD-JBAT06 automatic paper tube curling machine is composed of frame, tail top, supporting plate, motor, cylinder, oil cylinder and hydraulic station.

The frame of JYD-JBAT06 automatic paper tube curling machine consists of a beam, two columns and four casters. There are two casters at the bottom of the two columns, the beam and the column are connected through a fixed sleeve, a threaded clutch is welded on the beam, and springs, spring seats, lock bodies and other parts are arranged on the two columns.

The characteristic of JYD-JBAT06 automatic paper tube curling machine is that the machine frame is welded with a threaded clutch and the main shaft is divided into five sections, three sections are straight sections, two sections are threaded sections, and are distributed at 120 degrees by three rolling rods. There is a roller on one side of the rolling rod, and a roller on the other end. The motor passes through the worm gear, and the worm drive makes the main shaft drive the automatic lifting mechanism and the automatic crimping mechanism to work. The whole process of the crimping machine is automatically completed, with simple operation and high efficiency. , low cost and flexible use.